Downloads:

350,033

Downloads of v 1.1.0.50000000:

5,722

Last Update:

26 May 2017

Package Maintainer(s):

Software Author(s):

  • Shining Light Productions

Tags:

openssl-light openssl ssl tls pfx pem key rsa admin foss cross-platform

OpenSSL – The Open Source SSL and TLS toolkit

This is not the latest version of OpenSSL – The Open Source SSL and TLS toolkit available.

1.1.0.50000000 | Updated: 26 May 2017

Downloads:

350,033

Downloads of v 1.1.0.50000000:

5,722

Software Author(s):

  • Shining Light Productions

OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.50000000

This is not the latest version of OpenSSL – The Open Source SSL and TLS toolkit available.

All Checks are Passing

2 Passing Test


Validation Testing Passed


Verification Testing Passed

Details

To install OpenSSL – The Open Source SSL and TLS toolkit, run the following command from the command line or from PowerShell:

>

To upgrade OpenSSL – The Open Source SSL and TLS toolkit, run the following command from the command line or from PowerShell:

>

To uninstall OpenSSL – The Open Source SSL and TLS toolkit, run the following command from the command line or from PowerShell:

>

NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://chocolatey.org/api/v2. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Enter your internal repository url

(this should look similar to https://chocolatey.org/api/v2)

4. Choose your deployment method:


choco upgrade openssl.light -y --source="'STEP 3 URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade openssl.light -y --source="'STEP 3 URL'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode

- name: Ensure openssl.light installed
  win_chocolatey:
    name: openssl.light
    state: present
    version: 1.1.0.50000000
    source: STEP 3 URL

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

Coming early 2020! Central Managment Reporting available now! More information...


chocolatey_package 'openssl.light' do
  action    :install
  version  '1.1.0.50000000'
  source   'STEP 3 URL'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


Chocolatey::Ensure-Package
(
    Name: openssl.light,
    Version: 1.1.0.50000000,
    Source: STEP 3 URL
);

Requires Otter Chocolatey Extension. See docs at https://inedo.com/den/otter/chocolatey.


cChocoPackageInstaller openssl.light
{
   Name     = 'openssl.light'
   Ensure   = 'Present'
   Version  = '1.1.0.50000000'
   Source   = 'STEP 3 URL'
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'openssl.light':
  provider => 'chocolatey',
  ensure   => '1.1.0.50000000',
  source   => 'STEP 3 URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.


salt '*' chocolatey.install openssl.light version="1.1.0.50000000" source="STEP 3 URL"

See docs at https://docs.saltstack.com/en/latest/ref/modules/all/salt.modules.chocolatey.html.

5. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved as a trusted package on 26 May 2017.

Description

The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols as well as a full-strength general purpose cryptography library. The project is managed by a worldwide community of volunteers that use the Internet to communicate, plan, and develop the OpenSSL toolkit and its related documentation.

The Win32 OpenSSL Installation Project is dedicated to providing a simple installation of OpenSSL. It is easy to set up and easy to use through the simple, effective installer. No need to compile anything or jump through any hoops, just click a few times and it is installed, leaving you to doing real work. Download it today! Note that these are default builds of OpenSSL and subject to local and state laws. More information can be found in the legal agreement of the installation.

Package Parameters

  • /InstallDir:- Installation directory, defaults to the 'Program Files\OpenSSL' directory.

legal\LICENSE.txt

  LICENSE ISSUES
  ==============

  The OpenSSL toolkit stays under a double license, i.e. both the conditions of
  the OpenSSL License and the original SSLeay license apply to the toolkit.
  See below for the actual license texts.

  OpenSSL License
  ---------------

/* ====================================================================
 * Copyright (c) 1998-2017 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    [email protected]
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * ([email protected]).  This product includes software written by Tim
 * Hudson ([email protected]).
 *
 */

 Original SSLeay License
 -----------------------

/* Copyright (C) 1995-1998 Eric Young ([email protected])
 * All rights reserved.
 *
 * This package is an SSL implementation written
 * by Eric Young ([email protected]).
 * The implementation was written so as to conform with Netscapes SSL.
 * 
 * This library is free for commercial and non-commercial use as long as
 * the following conditions are aheared to.  The following conditions
 * apply to all code found in this distribution, be it the RC4, RSA,
 * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
 * included with this distribution is covered by the same copyright terms
 * except that the holder is Tim Hudson ([email protected]).
 * 
 * Copyright remains Eric Young's, and as such any Copyright notices in
 * the code are not to be removed.
 * If this package is used in a product, Eric Young should be given attribution
 * as the author of the parts of the library used.
 * This can be in the form of a textual message at program startup or
 * in documentation (online or textual) provided with the package.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *    "This product includes cryptographic software written by
 *     Eric Young ([email protected])"
 *    The word 'cryptographic' can be left out if the rouines from the library
 *    being used are not cryptographic related :-).
 * 4. If you include any Windows specific code (or a derivative thereof) from 
 *    the apps directory (application code) you must include an acknowledgement:
 *    "This product includes software written by Tim Hudson ([email protected])"
 * 
 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * The licence and distribution terms for any publically available version or
 * derivative of this code cannot be changed.  i.e. this code cannot simply be
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */

legal\VERIFICATION.txt
VERIFICATION
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.

The embedded software have been downloaded from the listed download
location on <https://slproweb.com/products/Win32OpenSSL.html>
and can be verified by doing the following:

1. Download the following:
  32-Bit software: <https://slproweb.com/download/Win32OpenSSL_Light-1_1_0f.exe>
  64-Bit software: <https://slproweb.com/download/Win64OpenSSL_Light-1_1_0f.exe>
2. Get the checksum using one of the following methods:
  - Using powershell function 'Get-FileHash'
  - Use chocolatey utility 'checksum.exe'
3. The checksums should match the following:

  checksum type: sha256
  checksum32: AB04AF74F492FD4903D81C4EB209D1A3A6655D8BC3E4B92363A977CCE3A59AD9
  checksum64: DB38B30A32764214152AB17138539B4352D3396784280AEC153D404009D803BD

The file 'LICENSE.txt' has been obtained from <https://www.openssl.org/source/license.txt>
tools\chocolateyInstall.ps1
$ErrorActionPreference = 'Stop';

$toolsPath = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"

$pp = Get-PackageParameters
$silentArgs = '/silent','/sp-','/suppressmsgboxes'
if ($pp.InstallDir) { $silentArgs += @("/DIR=`"$($pp.InstallDir)`"") }
else {
  $silentArgs += @("/DIR=`"$env:ProgramFiles\OpenSSL`"")
}

$packageArgs = @{
  packageName    = 'OpenSSL.Light'
  fileType       = 'exe'
  file           = "$toolsPath\Win32OpenSSL_Light-1_1_0f.exe"
  file64         = "$toolsPath\Win64OpenSSL_Light-1_1_0f.exe"
  softwareName   = 'OpenSSL*Light*'
  silentArgs     = $silentArgs
  validExitCodes = @(0)
}

Install-ChocolateyInstallPackage @packageArgs

Remove-Item -Force -ea 0 "$toolsPath\*.exe","$toolsPath\*.ignore"
tools\Win32OpenSSL_Light-1_1_0f.exe
md5: 0CA0EBF210DFBB3A0445B5C2FBFD31E9 | sha1: 64B3F83567A80B9C0E2353AF7A30AD9178FC1C5F | sha256: AB04AF74F492FD4903D81C4EB209D1A3A6655D8BC3E4B92363A977CCE3A59AD9 | sha512: 44F86A7A97918E3117EA05DEC9AB61824B5FEF5A19A44869105FC63DCE507FD86DE75457BAFD609E3A2C179EDBDD622FC1E7F80829D1DFA4AE14E695ADFB4D92
tools\Win64OpenSSL_Light-1_1_0f.exe
md5: 3E005786F71E81A3EE6508FF44B91691 | sha1: DBB51E00B0085BD87C3E37FB71E4E2144969B321 | sha256: DB38B30A32764214152AB17138539B4352D3396784280AEC153D404009D803BD | sha512: 292DFED1927521375885E7271C35A35A556C6F9D448EF7937BDFA87D83B3ADB98762C82B638ACCC6DD1AF2C3D4A05A3D795F3946DA2812FCEA17BAA02903C0C2

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version Downloads Last Updated Status
OpenSSL – The Open Source SSL and TLS toolkit 1.1.1 32290 Friday, September 14, 2018 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.80000000 29273 Tuesday, August 14, 2018 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.70000000 79603 Tuesday, March 27, 2018 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.60000000 37978 Saturday, November 4, 2017 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.50000001 20054 Wednesday, June 28, 2017 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.50000000 5722 Friday, May 26, 2017 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.40000001 2952 Saturday, May 6, 2017 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.40000000 1332 Thursday, April 27, 2017 Approved
OpenSSL – The Open Source SSL and TLS toolkit 1.1.0.20170216 13976 Thursday, February 16, 2017 Approved
Discussion for the OpenSSL – The Open Source SSL and TLS toolkit Package

Ground Rules:

  • This discussion is only about OpenSSL – The Open Source SSL and TLS toolkit and the OpenSSL – The Open Source SSL and TLS toolkit package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or OpenSSL – The Open Source SSL and TLS toolkit, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus