Notices: This section not yet converted to new layout. Download stats are rolling back out.

This is not the latest version of New Relic .NET Agent available.

New Relic .NET Agent

4.2.185

There are no package test results for this package

This package was approved as a trusted package on 4/1/2015.

New Relic .NET Agent that allows you to monitor your .NET application. Package has following parameters:

-param 'licensekey=newrelickey' # Specify Your NewRelic license key
-param 'restartiis=true' # (Optional) Stop IIS service, install package, start IIS after.
-param 'licensekey=yourkey;restartiis=true' # Specify License key and handle IIS restarts.

This package is updated automatically to use new url when a new version comes out.

To install New Relic .NET Agent, run the following command from the command line or from PowerShell:

C:\> choco install newrelic-dotnet --version 4.2.185

To upgrade New Relic .NET Agent, run the following command from the command line or from PowerShell:

C:\> choco upgrade newrelic-dotnet --version 4.2.185

Files

Hide
  • tools\chocolateyUninstall.ps1 Show
    $packageName = 'newrelic-dotnet' # arbitrary name for the package, used in messages
    
    try {
    
      # http://stackoverflow.com/questions/450027/uninstalling-an-msi-file-from-the-command-line-without-using-msiexec
      $msiArgs = "/X {1E9129D9-6FFB-4223-A6CC-E6D7BC21C38C} /qb"
      
      Start-ChocolateyProcessAsAdmin "$msiArgs" 'msiexec'
    
      Write-ChocolateySuccess $package
    } catch {
      Write-ChocolateyFailure $package "$($_.Exception.Message)"
      throw
    }
  • tools\chocolateyInstall.ps1 Show
    #NOTE: Please remove any commented lines to tidy up prior to releasing the package, including this one
    
    #Items that could be replaced based on what you call chocopkgup.exe with
    #newrelic-dotnet - Package Name (should be same as nuspec file and folder) |/p
    #4.2.185 - The updated version | /v
    #http://download.newrelic.com/dot_net_agent/release/NewRelicAgent_x86_4.2.185.0.msi - The url for the native file | /u
    #c:\ProgramData\Chocolatey\_work\NewRelicAgent_x86_4.1.136.0.msi - Downloaded file if including it in package | /pp
    # - This will be used later | /pg
    #http://download.newrelic.com/dot_net_agent/release/NewRelicAgent_x64_4.2.185.0.msi - The 64bit url for the native file | /u64
    
    $packageName = 'newrelic-dotnet' # arbitrary name for the package, used in messages
    $installerType = 'msi' #only one of these: exe, msi, msu
    $url = 'http://download.newrelic.com/dot_net_agent/release/NewRelicAgent_x86_4.2.185.0.msi' # download url
    $url64 = 'http://download.newrelic.com/dot_net_agent/release/NewRelicAgent_x64_4.2.185.0.msi' # 64bit URL here or remove - if installer decides, then use $url
    $silentArgs = '/qb INSTALLLEVEL=50' # "/s /S /q /Q /quiet /silent /SILENT /VERYSILENT" # try any of these to get the silent installer #msi is always /quiet
    $validExitCodes = @(0) #please insert other valid exit codes here, exit codes for ms http://msdn.microsoft.com/en-us/library/aa368542(VS.85).aspx
    
    # Defaults
    $restartiis = $false
    
    
    
    
    
    if (![string]::IsNullOrEmpty($env:chocolateyPackageParameters))
    {
    	if ($env:chocolateyPackageParameters.ToLower().Contains("restartiis") -or $env:chocolateyPackageParameters.ToLower().Contains("license_key"))
    	{		
    		# Getting Parameters
    		$rawTxt =  [regex]::escape($env:chocolateyPackageParameters)
    		$params = $($rawTxt -split ';' | ForEach-Object {
    		   $temp= $_ -split '='
    		   "{0}={1}" -f $temp[0].Substring(0,$temp[0].Length),$temp[1]
    		} | ConvertFrom-StringData)
    
    
    		if ($params.restartiis -eq 'true')
    		{			
    			Write-Host "Found 'restartiis' parameter enabled."
    			$restartiis = $true
    			
    		}
    		else
    		{
    			$restartiis = $false
    		}
    		
    		if (![string]::IsNullOrEmpty($params.license_key))
    		{				
    			# Passing License key
    			$silentArgs = $silentArgs + " NR_LICENSE_KEY=" + $params.license_key			
    		}
    		else
    		{
    			Write-Warning "No New Relic license key specified. Please use -params 'license_key=<newrelic_key>' or alternatively specify it manually after installation."
    		}
    	}
    	else
    	{
    		Write-Warning "No New Relic license key specified. Please use -params 'license_key=<newrelic_key>' or alternatively specify it manually after installation."
    	}
    }
    else
    {
    	Write-Warning "No New Relic license key specified. Please use -params 'license_key=<newrelic_key>' or alternatively specify it manually after installation."
    }
    
    
    
    try { #error handling is only necessary if you need to do anything in addition to/instead of the main helpers
      
    	if ($restartiis)
    	{
    	  # Stop IIS before installing
    	  $ServiceName = "W3SVC"
    	  $service = Get-Service "$ServiceName" -ErrorAction SilentlyContinue
    		if ($service -ne $null)
    		{
    			
    				Write-Host $($ServiceName+" service will be stopped")
    
    				Stop-Service $ServiceName
    				 
    				echo "Sleeping for $sleep_timeout seconds"	
    				
    				$i = 0
    				while (!(Get-Service $ServiceName | Where-Object {$_.status -eq "stopped"}))
    				{	
    					
    					echo "Waiting for ${ServiceName} to be stopped"		
    					if ($i -gt $sleep_timeout)
    					{
    						throw "Can't wait for ${ServiceName} to be stopped. Took longer than ${sleep_timeout}s: Timeout"
    					}
    					Echo "[$i]"
    					Start-Sleep -s 1
    					$i++
    				}
    				echo "${ServiceName} is stopped. Continue."
    				
    				Install-ChocolateyPackage "$packageName" "$installerType" "$silentArgs" "$url" "$url64"  -validExitCodes $validExitCodes
    				
    				Write-Host "Configuring $ServiceName to autostart"
    				
    				Set-Service $ServiceName -startuptype "auto"
    				
    				Write-Host $("Starting "+$ServiceName+" service")
    				Start-Service $ServiceName
    		}
    		else
    		{	
    			echo "No ${ServiceName} service found. Nothing to restart. Continue."
    			Install-ChocolateyPackage "$packageName" "$installerType" "$silentArgs" "$url" "$url64"  -validExitCodes $validExitCodes
    		}
    	}
    	else
    	{	
    		Write-Warning "IIS will not be restarted. Please do so manually. In order to stop & start IIS automatically use parameter: -params 'restartiis=true'. "		
    		Install-ChocolateyPackage "$packageName" "$installerType" "$silentArgs" "$url" "$url64"  -validExitCodes $validExitCodes
    	}
      
    } catch {
      Write-ChocolateyFailure "$packageName" "$($_.Exception.Message)"
      throw
    }
    

Virus Scan Results

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Dependencies

This package has no dependencies.

Package Maintainer(s)

Software Author(s)

  • NewRelic

Copyright

https://www.newrelic.com

Tags

Release Notes

https://docs.newrelic.com/docs/release-notes/agent-release-notes/net-release-notes

Version History

Version Downloads Last updated Status
New Relic .NET Agent 8.13.798.0 1469 Tuesday, February 12, 2019 approved
New Relic .NET Agent 8.12.216.0 642 Thursday, January 10, 2019 approved
New Relic .NET Agent 8.11.157.0 610 Monday, December 17, 2018 approved
New Relic .NET Agent 8.10.51.0 631 Friday, November 30, 2018 approved
New Relic .NET Agent 8.9.130.0 762 Thursday, November 15, 2018 approved
New Relic .NET Agent 8.8.83.0 1868 Wednesday, October 17, 2018 approved
New Relic .NET Agent 8.7.75.0 796 Wednesday, October 3, 2018 approved
New Relic .NET Agent 8.6.45.0 2230 Tuesday, August 28, 2018 approved
New Relic .NET Agent 8.5.186.0 779 Thursday, August 16, 2018 approved
Show More

Discussion for the New Relic .NET Agent Package

Ground rules:

  • This discussion is only about New Relic .NET Agent and the New Relic .NET Agent package. If you have feedback for Chocolatey, please contact the google group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or New Relic .NET Agent, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.

comments powered by Disqus
Chocolatey.org uses cookies to enhance the user experience of the site.
Ok