Downloads of v 3.9.0:


Last Update:

22 Sep 2019

Package Maintainer(s):

Software Author(s):

  • pancake aka @trufae


radare2 c commandline unix reverse-engineering forensics analysis

radare (Install)

3.9.0 | Updated: 22 Sep 2019



Downloads of v 3.9.0:



Software Author(s):

  • pancake aka @trufae

radare (Install) 3.9.0

All Checks are Passing

2 Passing Test

Validation Testing Passed

Verification Testing Passed


To install radare (Install), run the following command from the command line or from PowerShell:


To upgrade radare (Install), run the following command from the command line or from PowerShell:


To uninstall radare (Install), run the following command from the command line or from PowerShell:


NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Enter your internal repository url

(this should look similar to

4. Choose your deployment method:

choco upgrade radare -y --source="'STEP 3 URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:

choco upgrade radare -y --source="'STEP 3 URL'"

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0

Exit $exitCode

- name: Ensure radare installed
    name: radare
    state: present
    version: 3.9.0
    source: STEP 3 URL

See docs at

Coming early 2020! Central Managment Reporting available now! More information...

chocolatey_package 'radare' do
  action    :install
  version  '3.9.0'
  source   'STEP 3 URL'

See docs at

    Name: radare,
    Version: 3.9.0,
    Source: STEP 3 URL

Requires Otter Chocolatey Extension. See docs at

cChocoPackageInstaller radare
   Name     = 'radare'
   Ensure   = 'Present'
   Version  = '3.9.0'
   Source   = 'STEP 3 URL'

Requires cChoco DSC Resource. See docs at

package { 'radare':
  provider => 'chocolatey',
  ensure   => '3.9.0',
  source   => 'STEP 3 URL',

Requires Puppet Chocolatey Provider module. See docs at

salt '*' chocolatey.install radare version="3.9.0" source="STEP 3 URL"

See docs at

5. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved as a trusted package on 05 Feb 2020.


Radare is a portable reversing framework that can...

  • Disassemble (and assemble for) many different architectures
  • Debug with local native and remote debuggers (gdb, rap, webui, r2pipe, winedbg, windbg)
  • Run on Linux, *BSD, Windows, OSX, Android, iOS, Solaris and Haiku
  • Perform forensics on filesystems and data carving
  • Be scripted in Python, Javascript, Go and more
  • Support collaborative analysis using the embedded webserver
  • Visualize data structures of several file types
  • Patch programs to uncover new features or fix vulnerabilities
  • Use powerful analysis capabilities to speed up reversing
  • Aid in software exploitation

$ErrorActionPreference = 'Stop';
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"
$url64      = ''

$packageArgs = @{
  packageName   = $env:ChocolateyPackageName
  unzipLocation = $toolsDir
  url64bit      = $url64

  softwareName  = 'radare*'

  checksum64    = '67D6C6C143EC72DCB5D35C1BD4FD3EC308D2CB9183B7D8FB10319ED3CB554D79'
  checksumType64= 'sha256'

  Uninstall-ChocolateyPackage -PackageName 'radare'
  #no op

Install-ChocolateyZipPackage @packageArgs

Log in or click on link to see number of positives.

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version Downloads Last Updated Status
radare (Install) 3.1.0 431 Monday, January 14, 2019 Approved
radare (Install) 2.7.0 276 Wednesday, September 12, 2018 Approved
radare (Install) 2.6.0 265 Thursday, May 31, 2018 Approved
radare (Install) 2.3.0 304 Friday, March 2, 2018 Approved
radare (Install) 2.2.0 253 Wednesday, January 3, 2018 Approved
radare (Install) 2.0.1 333 Tuesday, October 24, 2017 Approved
radare (Install) 1.6.0 229 Saturday, September 9, 2017 Approved

Release Notes

  • Version: 3.9.0
  • PreviousVersion: 3.8.0
  • Commits: 102
  • Contributors: 31
  • TimeSinceLastRelease: 2 weeks




  • Implement anal.norevisit using SetU instead of Sdb
  • Fix #15013 - jump/cjmp analop for m680x
  • Fix the infinite aac issue, reduce false positives, speedup a bit (#15015)
  • Fix mov.l/jsr ESIL for SuperH4 (#15039)
  • Fix nopskip (its not fixed at all. just random typing here and there) (#15024)
  • Add anal.nonull to avoid analyzing functions if starting by zeros
  • Fixed i4004 arch to be according to spec (#15062)
  • Fix zero register set issue (r2wars)
  • Implement types field for zignatures


  • Fix #14611: Vi-mode indication by prompt color
  • Add a way to print an aliased without a trailing new line (#15031)
  • Fix clicking on frame borders to resize
  • Remove code for no-anal (#14977)


  • Make -m do an implicit -s
  • Fix #14990 - multiple quoted command parsing issue
  • Fix multiple quote cmd issue
  • Fix #14019 - Move ta to aht, move other commands around, refactor indentation
  • Fix #10851 - Solve slurp messages on http/sandbox/pipe
  • Don't run ldconfig when installing into /usr (#15049)


  • Fix gdb reg write byte order (#15009)
  • Improving slighty the process status check on Darwin
  • On Darwin, expose process path
  • ASLR check setting fix on FreeBSD


  • Hackaround to get esil stepping on delayed execution
  • Fix arm32 stmia post-increment (#14983) (r2wars)


  • Support shm_open in shm:// and some code cleanup
  • Fixing perms for Darwin
  • Fix #15002 - Propagate write error issues into RCore.patch
  • Print error msg if write fails (#14978)
  • Fixing self:// perms issue on Darwin

This package has no dependencies.

Discussion for the radare (Install) Package

Ground Rules:

  • This discussion is only about radare (Install) and the radare (Install) package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or radare (Install), or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus