Wings 3D

2.2.4 | Updated: 5/1/2019

Downloads:

1,064

Downloads of v 2.2.4:

99

Software Author(s):

  • Wings3D Team

Wings 3D 2.2.4

All Checks are Passing

2 Passing Test


Validation Testing Passed


Verification Testing Passed

Details

To install Wings 3D, run the following command from the command line or from PowerShell:

>

To upgrade Wings 3D, run the following command from the command line or from PowerShell:

>

To uninstall Wings 3D, run the following command from the command line or from PowerShell:

>

NOTE: This applies to both open source and commercial editions of Chocolatey.

1. Ensure you are set for organizational deployment

Please see the organizational deployment guide

  • Open Source or Commercial:
    • Proxy Repository - Create a proxy nuget repository on Nexus, Artifactory Pro, or a proxy Chocolatey repository on ProGet. Point your upstream to https://chocolatey.org/api/v2. Packages cache on first access automatically. Make sure your choco clients are using your proxy repository as a source and NOT the default community repository. See source command for more information.
    • You can also just download the package and push it to a repository Download

3. Enter your internal repository url

(this should look similar to https://chocolatey.org/api/v2)

4. Choose your deployment method:


choco upgrade wings3d -y --source="'STEP 3 URL'" [other options]

See options you can pass to upgrade.

See best practices for scripting.

Add this to a PowerShell script or use a Batch script with tools and in places where you are calling directly to Chocolatey. If you are integrating, keep in mind enhanced exit codes.

If you do use a PowerShell script, use the following to ensure bad exit codes are shown as failures:


choco upgrade wings3d -y --source="'STEP 3 URL'" 
$exitCode = $LASTEXITCODE

Write-Verbose "Exit code was $exitCode"
$validExitCodes = @(0, 1605, 1614, 1641, 3010)
if ($validExitCodes -contains $exitCode) {
  Exit 0
}

Exit $exitCode

- name: Ensure wings3d installed
  win_chocolatey:
    name: wings3d
    state: present
    version: 2.2.4
    source: STEP 3 URL

See docs at https://docs.ansible.com/ansible/latest/modules/win_chocolatey_module.html.

Coming early 2020! Central Managment Reporting available now! More information...


chocolatey_package 'wings3d' do
  action    :install
  version  '2.2.4'
  source   'STEP 3 URL'
end

See docs at https://docs.chef.io/resource_chocolatey_package.html.


Chocolatey::Ensure-Package
(
    Name: wings3d,
    Version: 2.2.4,
    Source: STEP 3 URL
);

Requires Otter Chocolatey Extension. See docs at https://inedo.com/den/otter/chocolatey.


cChocoPackageInstaller wings3d
{
   Name     = 'wings3d'
   Ensure   = 'Present'
   Version  = '2.2.4'
   Source   = 'STEP 3 URL'
}

Requires cChoco DSC Resource. See docs at https://github.com/chocolatey/cChoco.


package { 'wings3d':
  provider => 'chocolatey',
  ensure   => '2.2.4',
  source   => 'STEP 3 URL',
}

Requires Puppet Chocolatey Provider module. See docs at https://forge.puppet.com/puppetlabs/chocolatey.


salt '*' chocolatey.install wings3d version="2.2.4" source="STEP 3 URL"

See docs at https://docs.saltstack.com/en/latest/ref/modules/all/salt.modules.chocolatey.html.

5. If applicable - Chocolatey configuration/installation

See infrastructure management matrix for Chocolatey configuration elements and examples.

This package was approved by moderator gep13 on 5/8/2019.

Description

Prerequisites

To launch Wings3D, you need OpenGL 2.1 for Windows. See https://www.khronos.org/opengl/wiki/GettingStarted#DownloadingOpenGL

Features

Overview

  • Context sensitive interface
  • Configurable interface and hotkeys
  • Wide range of Selection and Mesh tools
  • Exports to common 3d file formats like .obj
  • UV mapper, Vertex Colors, Materials, and Lights

Intuitive Interface

Wings has a simple interface. Right-click menus give you easy access to common commands. These menus are context sensitive, so depending on your selection, a different menu pops up.

Hovering over any menu item will display a brief description of the command in the Info Line at the bottom of the main window.

Variations to commands are listed in the Info Line. Many commands let you pick an extra vector or point that the command should operate upon. Command variations are initiated by selecting the command using the different mouse buttons. In the Info Line, the mouse buttons are abbreviated to L, M, and R.

Tools

Wings 3D has a comprehensive set of mesh modeling and selection tools.

  • Standard tools such as Move, Scale, Rotate, Extrude, Bevel, Bridge, Cut, and Weld.
  • Advanced tools including: Sweep, Plane Cut, Circularise, Intersect, Bend, Shear, and Inset.
  • Magnets and Magnet Masking
  • Virtual Mirror for symmetrical modeling
  • Tweak and Sculpt
  • Edge Loop and Edge Ring selection and navigation tools
  • Smooth Preview
  • Much, MUCH more!

AutoUV

Add textures to your model using the AutoUV facility. AutoUV helps you cut and unfold an image of your model’s surface, which you can then export for painting and texturing.

screenshot


legal\LICENSE.txt
This software is copyrighted by Bjorn Gustavsson, and other parties.
The following terms apply to all files associated with the software unless
explicitly disclaimed in individual files.

The authors hereby grant permission to use, copy, modify, distribute,
and license this software and its documentation for any purpose, provided
that existing copyright notices are retained in all copies and that this
notice is included verbatim in any distributions. No written agreement,
license, or royalty fee is required for any of the authorized uses.
Modifications to this software may be copyrighted by their authors
and need not follow the licensing terms described here, provided that
the new terms are clearly indicated on the first page of each file where
they apply.

IN NO EVENT SHALL THE AUTHORS OR DISTRIBUTORS BE LIABLE TO ANY PARTY
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS SOFTWARE, ITS DOCUMENTATION, OR ANY
DERIVATIVES THEREOF, EVEN IF THE AUTHORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.  THIS SOFTWARE
IS PROVIDED ON AN "AS IS" BASIS, AND THE AUTHORS AND DISTRIBUTORS HAVE
NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
MODIFICATIONS.

GOVERNMENT USE: If you are acquiring this software on behalf of the
U.S. government, the Government shall have only "Restricted Rights"
in the software and related documentation as defined in the Federal 
Acquisition Regulations (FARs) in Clause 52.227.19 (c) (2).  If you
are acquiring the software on behalf of the Department of Defense, the
software shall be classified as "Commercial Computer Software" and the
Government shall have only "Restricted Rights" as defined in Clause
252.227-7013 (c) (1) of DFARs.  Notwithstanding the foregoing, the
authors grant the U.S. Government and others acting in its behalf
permission to use and distribute the software in accordance with the
terms specified in this license. 
legal\VERIFICATION.txt
VERIFICATION
 
Verification is intended to assist the Chocolatey moderators and community
in verifying that this package's contents are trustworthy.
 
Package can be verified like this:
 
1. Download:
 
   x32: https://freefr.dl.sourceforge.net/project/wings/wings/2.2.4/wings-2.2.4.exe
   x64: https://freefr.dl.sourceforge.net/project/wings/wings/2.2.4/wings-x64-2.2.4.exe
  
2. You can use one of the following methods to obtain the SHA256 checksum:
   - Use powershell function 'Get-FileHash'
   - Use Chocolatey utility 'checksum.exe'
 
   checksum type: sha256
   checksum32: 37823E0D92BF9D66B18015B6A03D368387856A83787FD336A7B808425675D769
   checksum64: 425CF26AAACF83866BB71ADE10285DDCE7C39AAD0591423A4295B0154DB2FA1B
 
Using AU:
 
   Get-RemoteChecksum https://freefr.dl.sourceforge.net/project/wings/wings/2.2.4/wings-2.2.4.exe
   Get-RemoteChecksum https://freefr.dl.sourceforge.net/project/wings/wings/2.2.4/wings-x64-2.2.4.exe
 
File 'LICENSE.txt' is obtained from:
   https://sourceforge.net/p/wings/code/ci/master/tree/license.terms?format=raw
tools\chocolateyinstall.ps1
$ErrorActionPreference = 'Stop';
$toolsDir   = "$(Split-Path -parent $MyInvocation.MyCommand.Definition)"

$packageArgs = @{
  packageName   = $env:ChocolateyPackageName
  destination   = $toolsDir    
  file          = "$toolsDir\wings-2.2.4.exe"    
  file64        = "$toolsDir\wings-x64-2.2.4.exe"    
  silentArgs	= "/S"
}

Install-ChocolateyInstallPackage @packageArgs
Write-Warning "OpenGL 2.1 for Windows is needed to launch Wings3D. See https://www.khronos.org/opengl/wiki/Getting_Started#Downloading_OpenGL"
tools\chocolateyuninstall.ps1
$ErrorActionPreference = 'Stop';

$packageArgs = @{
  packageName   = $env:ChocolateyPackageName
  softwareName  = 'Wings 3D *'
  fileType      = 'exe'
  silentArgs    = "/S"
}

$uninstalled = $false
[array]$key = Get-UninstallRegistryKey -SoftwareName $packageArgs['softwareName']

if ($key.Count -eq 1) {
  $key | % {
    $packageArgs['file'] = "$($_.UninstallString)"
    Uninstall-ChocolateyPackage @packageArgs
  }
} elseif ($key.Count -eq 0) {
  Write-Warning "$packageName has already been uninstalled by other means."
} elseif ($key.Count -gt 1) {
  Write-Warning "$($key.Count) matches found!"
  Write-Warning "To prevent accidental data loss, no programs will be uninstalled."
  Write-Warning "Please alert package maintainer the following keys were matched:"
  $key | % {Write-Warning "- $($_.DisplayName)"}
}
tools\wings-2.2.4.exe
md5: 1EBAC8D62A611F4FC4E17F6AD2C7F80B | sha1: 85D811CD60D2DD919F268ED7B234F7A1D90CE8F9 | sha256: 37823E0D92BF9D66B18015B6A03D368387856A83787FD336A7B808425675D769 | sha512: 7E49233419FE64FECDEFC60BEFE0B6DBA2074316BCEDF9B465F6B2F76A17E6AD117FB65A2D364C88B1D5D4B9DA74D0839C0B1412912C2690816D800842A9F1F9
tools\wings-x64-2.2.4.exe
md5: B54D00BCDFDCD6E3E52FBEA963DF681F | sha1: 321A7B9B93FB2F155BD3D135C0DA4CE6E2BB74C4 | sha256: 425CF26AAACF83866BB71ADE10285DDCE7C39AAD0591423A4295B0154DB2FA1B | sha512: 6E74F2BFA258D3B7011809B8306035090D69C8189973A0A3DE7762B6CE34B6BC8014EAA9F3F69263BF79760140423DFB800DEAEBA645530AD9AEF982A85B0AB2

In cases where actual malware is found, the packages are subject to removal. Software sometimes has false positives. Moderators do not necessarily validate the safety of the underlying software, only that a package retrieves software from the official distribution point and/or validate embedded software against official distribution point (where distribution rights allow redistribution).

Chocolatey Pro provides runtime protection from possible malware.

Version Downloads Last Updated Status
Wings3D 1.5.4 592 Wednesday, December 23, 2015 Approved
Wings3D 1.5.3 373 Sunday, August 24, 2014 Unknown

Discussion for the Wings 3D Package

Ground Rules:

  • This discussion is only about Wings 3D and the Wings 3D package. If you have feedback for Chocolatey, please contact the Google Group.
  • This discussion will carry over multiple versions. If you have a comment about a particular version, please note that in your comments.
  • The maintainers of this Chocolatey Package will be notified about new comments that are posted to this Disqus thread, however, it is NOT a guarantee that you will get a response. If you do not hear back from the maintainers after posting a message below, please follow up by using the link on the left side of this page or follow this link to contact maintainers. If you still hear nothing back, please follow the package triage process.
  • Tell us what you love about the package or Wings 3D, or tell us what needs improvement.
  • Share your experiences with the package, or extra configuration or gotchas that you've found.
  • If you use a url, the comment will be flagged for moderation until you've been whitelisted. Disqus moderated comments are approved on a weekly schedule if not sooner. It could take between 1-5 days for your comment to show up.
comments powered by Disqus